<p>The Auralex SubDude II has a highly stylish design that will look great in any studio or living room. This isolation platform will stop any unwanted room resonance caused by your subwoofer.</p>
Building a studio? Don't forget that proper acoustic treatment is just as important as the right gear! With this Auralex Studio Starter Kit, you can immediately deal with a bunch of annoyances related to bad acoustics.
Placing the Auralex SubDude HT isolation pad between your subwoofer and the floor reduces structural vibrations leading to tighter bass with better definition.
The Studiofoam Wedgies may be smaller than Aurelex's Wedges, but that doesn't make them any less interesting. These absorbers reduce reflections, fend off flutter echoes and peaks, and here, come in a pack of 24.
The Auralex MoPAD monitor isolation pads allows you to place your monitors on an isolating pad so they won't be affected by resonance or vibrations. This pack covers two average-to-large speakers.
If you need to keep things more flexible when it comes to acoustic treatment, this pair of Auralex ProMAX V2 absorber panels will do the job. Stand-mounted, these panels can simply be placed exactly where they're needed.
To help you pull the best performance out of your speaker, amplifier or monitor, Auralex serve up the Great GRAMMA: a high-quality isolation panel designed to ensure defined mids and clear bass.
Auralex's D36-DST Roominator set consists of 18 grey DST-112 panels and 18 DST-114 panels with two tubes of TubeTak Pro liquid adhesive. The DST-114s in this set are grey.
Slip the Auralex GRAMMA V2 beneath your amplifier, speaker, or monitor, and get treated to a tighter, more focussed low-end and enhanced mid-frequency definition.
Auralex's D36-DST Roominator set consists of 18 grey DST-112 panels and 18 DST-114 panels with two tubes of TubeTak Pro liquid adhesive. The DST-114s in this set are burgundy.
The Auralex MoPAD XL is a monitor isolation pad that allows you to easily isolate your monitor from the surface it's placed upon to improve its sound accuracy.
A regular sight in professional recording studios, Auralex Studiofoam Wedges efficiently counter all the standing waves, reverb and flutter echoes that are in danger of messing with your sound.
Auralex's Alpha-DST Roominator set consists of 32 grey DST-112 panels, 32 DST-114 panels and 4 grey LENRD-DST bass traps with three tubes of TubeTak Pro liquid adhesive. The DST-114s in this set are grey.
The Auralex Studiofoam Wedge is a 2-inch thick, full-size absorption panel of 61 x 22 cm.
Dealing with excessive lows? The Auralex LENRD bass trap is the solution you can't ignore. This pack sets you up with four dense bass traps that can be easily installed in the corners of your studio or recording booth.
Cleanly and easily install a set of Auralex panels in your studio space using this full pack of twenty-four self-adhesive Auralex EZ-Stick Pro Tabs.
Made to complement wall-mounted absorbers like Auralex's Wedges, the Auralex Studiofoam Cornerfill absorber gets rid of excess low frequencies and levels up the acoustics of your studio some more.
<p>The Auralex ProPads make sure that your studio monitors are not affected by vibrations and resonance, guaranteeing excellent sound reproduction in your studio.</p>
Place this set of Auralex ProPad XL isolation pads under both studio monitors to limit vibrational transfer, tighten up the low and midrange and enhance definition.
Auralex present the new-and-improved BabyGramma V2: a superb-quality isolation-pad for amps, speakers and monitors.
Designed to curb the low frequencies that bounce around in your studio, the Auralex DST-LENRD bass trap is a great match for the DST Series wall-mountable absorber panels. This is a pack of four.
Auralex's D36-DST Roominator set consists of 18 grey DST-112 panels and 18 DST-114 panels with two tubes of TubeTak Pro liquid adhesive. The DST-114s in this set are dark purple.
Mount your studio monitors onto these purpose-designed Auralex ProPod decouplers to prevent those microscopic vibrations from warping the audio and knocking the stereo image slightly off balance.
TubeTak Pro is a permanent fluid foam adhesive that bonds Auralex products. One tube is enough for about 3 m2, depending on how thick you apply it.
The Auralex DIY Acoustic Frame has been specifically designed to form the base of a fully customised absorber panel for studio spaces.
Carefully curated to support vocal recording, the VoxMAX Kit includes two stand-mounted absorber panels, a MudGuard v2 reflection filter and two stand-mounted LENRD bass traps.
The ProducerMAX Kit from Auralex is an isolation set designed for recording, monitoring and mixing jobs. Get the ideal acoustic setup for your (home) studio or stage in little time.
Auralex’s U-Boat is a rubber u-shape that you can use to float your floor or you can use it to isolate your floor, for the benefit of those living a floor below you, for instance.
The Auralex Alpha-DST Roominator Set includes 32x DST-112 panels, 32x DST-114 panels and 4x LENRD-DST bass traps with 3x TubeTak Pro adhesives. The DST-114 panels in this set have a dark purple finish.
The Auralex Alpha-DST Roominator Set includes 32x DST-112 panels, 32x DST-114 panels and 4x LENRD-DST bass traps with 3x TubeTak Pro adhesives. The DST-114 panels in this set have a burgundy finish.
The mammoth Auralex D108L Roominator acoustic treatment pack bundles up fifty-four DST-112 panels, fifty-four DST-114 panels and eight LENRD-DST bass traps plus six TubeTak Pro tubes of adhesive to get everything cleanly installed.
Filters