- Home /
- Departments /
- Studio & Recording /
- Studio Bundles /
- Neumann /
- Neumann TLM 102 recording bundle
Neumann TLM 102 recording bundle
Discontinued, this product can no longer be ordered.
Product no: 9000-0041-1262 Bax Music Warranty: Neumann TLM 102 Studio Set Microphone + Shock Mount (Nickel) This product comes with a 3-year warranty. RME Babyface Pro USB audio interface This product comes with a 3-year warranty. SE Electronics Reflexion Filter Pro (RF Pro) This product comes with a 3-year warranty. Beyerdynamic DT-770 Pro 250-ohm Studio Headphones This product comes with a 3-year warranty. Konig & Meyer 20130 microphone stand noiseless wide black This product comes with a 5-year warranty. Devine SPS 100 Pop Filter This product comes with a manufacturing defects warranty. Klotz M1FM1N0500 M1 Prime Microphone Cable with Neutrik Plugs, 5m This product comes with a lifetime manufacturing defects warranty. Steinberg Cubase Pro 10 DAW software This product comes with a manufacturing defects warranty.
Specifications
The Neumann TLM 102 Studio Set includes 2 the TLM 102 condenser microphone and matching EA4 shock mount. An outstanding bundle for any studio!
Product features
Tube microphone | no |
---|---|
Sustainable product | not specified |
Microphone sensitivity (dBV/PA) | -39 |
Microphone impedance | 50-99 ohms |
Microphone sound | clean/neutral |
Low-cut filter | no |
Maximum SPL | 140 dB - 149 dB |
Maximum frequency | 20 - 20.9 kHz |
Microphone accessories | shock mount, microphone clip |
Minimum frequency | 20 - 21 Hz |
Multi-pattern | no |
Pad switch | no |
Polar pattern | cardioid |
Stereo | no |
Vintage microphone family | not applicable |
Weight and dimensions including packaging
Weight (incl. packaging) | 975 gr |
---|---|
Dimensions (incl. packaging) | 28,0 x 18,5 x 11,0 cm |
Product specifications
- Neumann TLM 102 Studio Set
- large-diaphragm studio microphone
- bundle with matching EA-4 shock mount
- acoustic operating principle: pressure-gradient transducer
- pickup pattern: cardioid
- frequency response: 20 Hz - 20 kHz
- sensitivity @ 1 kHz, 1 kOhm: 11 mV/Pa
- nominal impedance: 50 Ohms
- rated load impedance: 1 kOhm
- equivalent sound level: 21 dB
- signal-noise ratio: 73 dB
- max. SPL for THD 0.5%: 144 dB
- max. output: 13 dBu
- power supply: 48V ± 4 V
- power consumption: 3.5 mA
- matching connector: XLR3F
- colour: nickel
- weight: 260 g
- diameter: 52 mm
- length: 116 mm
The Babyface Pro audio interface has two preamps with 48-volt phantom power, low latency AD/DA converters and RME's SteadyClock technology, and it's all wrapped up in one pretty package.
Product features
19 inches | no |
---|---|
Computer ports | USB |
Suitable for operating system | Apple OSX / Mac OS, Microsoft Windows |
Total microphone inputs | 2 |
Maximum sample rate | 192 kHz |
Included software | none |
MIDI I/O (din connector) | MIDI in, MIDI out |
Software included | yes, CD-ROM / DVD/ HDD |
Weight and dimensions including packaging
Weight (incl. packaging) | 1,7 kg |
---|---|
Dimensions (incl. packaging) | 31,0 x 16,0 x 9,0 cm |
Product specifications
- professional audio interface
- colour: silver
- 12 input and 12 output channels
- analogue inputs: 4x (mic / line / instr)
- analogue outputs: 4x (2x XLR, 2x headphone)
- 1x ADAT I/O or 1x SPDIF I/O
- MIDI I/O: 1x
- USB 2.0 (USB 3 compatible): 1x
- digital gain control for all inputs
- separate outputs for high and low impedance headphones
- TotalMix FX with EQ, reverb and delay
- including TotalMix FX software
The SE Electronics Reflexion Filter Pro is an easy-to-install reflection filter that will increase the quality of your recordings. Thanks to the high-quality components and solid construction, the filter will last you many years.
Product features
Reflection filter mount | microphone stand mount |
---|---|
Sustainable product | not specified |
Includes pop filter / cap | no |
Reflection filter for | vocal microphones, guitar microphones |
Weight and dimensions including packaging
Weight (incl. packaging) | 3,2 kg |
---|---|
Dimensions (incl. packaging) | 41,0 x 35,0 x 20,5 cm |
Product specifications
- delivered with suspension bracket for mounting on a microphone stand
- easy to mount
- for every type of space
- thanks the construction, no sound wave will bounce back in the direction of the microphone
- solid construction
- made from the best possible materials
Featuring a closed, dynamic design, a massive frequency range and 250 Ohm impedance, the Beyerdynamic DT770 Pro headphones are built for professional, high-end work.
Product features
Active noise suppression | no |
---|---|
Black Friday department | Headphones |
Deals for | producers, everyone |
Wireless | no |
Rotatable earpad | no |
Sustainable product | not specified |
Headphone weight | 270g |
Headphone construction | closed |
Ideal headphones for | studio |
Headphone impedance | > 200 ohms |
In/on/over ear | over-ear |
Includes microphone | no |
Design can be folded/dismantled | no |
Adjustable bass boost | no |
Removable cable | no |
Cable length | > / = 300 cm |
Colour | black |
Maximum frequency | 29 - 31.9 kHz |
Minimum frequency | 10 - 14 Hz |
Audio connection type | jack 3.5 mm TRS, jack 6.3 mm TRS |
Headphone design | modern |
Volume control | no |
Weight and dimensions including packaging
Weight (incl. packaging) | 600 gr |
---|---|
Dimensions (incl. packaging) | 23,0 x 22,0 x 11,5 cm |
Product specifications
- design: closed ear cups
- frequency response: 5Hz - 35kHz
- impedance: 32 Ohms
- SPL: 96dB
- THD: <0.2%
- power capacity: 100 mW
- passive sound isolation: +/- 18dB
- cable: 3m, coiled
- connections: 3.5 stereo mini-jack + 6.35mm jack adapter
- weight: 380g
This is a versatile microphone stand with a wide base and noiseless height adjustment. This prevents unwanted handling noise during a performance.
Product features
Sustainable product | not specified |
---|---|
Type of stand | straight stand |
Boom arm | no |
Construction | 2-part telescopic |
Type of stand base | flat base feet |
Height adjustable | yes |
Mininum stand height | 90 to 100 cm |
Maximum height of stand | 160 to 170 cm |
Screw thread size | 3/8 inch |
Stand material | steel |
Microphone stand weight | 2 - 3 kg |
Colour | black |
Set | no |
Included stand accessories | none |
Number of stands | 1 |
Weight and dimensions including packaging
Weight (incl. packaging) | 2,6 kg |
---|---|
Dimensions (incl. packaging) | 87,5 x 11,5 x 9,5 cm |
Product specifications
- noiseless microphone stand
- black variant
- no handling noise during the alteration of height
- wide, stable base with 3 legs
- ideal for stages with various artists
- height adjustment: 900 to 1605 mm
- weight: 2.4 kg
The SPS 100 pop filter is universal and can be clamped to any microphone stand. It makes plosive and hissing sounds sound softer and more natural in your recording. Ideal for home studio applications.
Product features
Pop filter mount | goose neck with stand mount |
---|---|
Sustainable product | not specified |
Filter material | nylon |
Vlog accessory type | pop filter |
Weight and dimensions including packaging
Weight (incl. packaging) | 200 gr |
---|---|
Dimensions (incl. packaging) | 37,5 x 19,0 x 6,0 cm |
Product specifications
- pop filter with acoustic nylon
- shields the microphone from blasts of air that might cause auxiliary noises to end up in your recording
- acoustic nylon lets the intended sound through
- equipped with microphone stand clamp that can be mounted onto the beam
- microphone clamp with spring, can be tightened with a screw mechanism for optimal stability
- designed for condenser vocal microphones, but can also be used with dynamic vocal microphones
With the Klotz M1FM1N0500 Neutrik XLR 3P – XLR 3P microphone cable 5 metres you choose security. The Neutrik XLR connectors are highly sound and extremely accurate.
Product features
Sustainable product | not specified |
---|---|
Audio connection type | 3-pin XLR |
Length | 5.00 m |
Colour | black |
Set | no |
(partially) coiled | no |
Right angled or straight | straight - straight |
Weight and dimensions including packaging
Weight (incl. packaging) | 250 gr |
---|---|
Dimensions (incl. packaging) | 26,0 x 22,0 x 3,5 cm |
Product specifications
- durable and accurate microphone cable
- cable length: 5 m
- colour: black
- cable type: Klotz professional microphone cable
- core diameter: 0.22 mm2
- connection: XLR female – XLR male
- Neutrik connectors
Steinberg's Cu base Pro 10 DAW offers a comfortable workflow, good effects, handy functions and high-quality virtual instruments for producers of any genre.
Product features
Educational versoin | no |
---|---|
Physical or download | card with download code |
Suitable for operating system | Apple OSX / Mac OS, Microsoft Windows |
Plug-in format | VST |
Registration method | registration by computer |
ReWire | yes |
Licence type | main product |
Weight and dimensions including packaging
Weight (incl. packaging) | 103 gr |
---|---|
Dimensions (incl. packaging) | 13,0 x 13,0 x 13,0 cm |
Product specifications
- Steinberg Cubase Pro 10
- DAW software
- suitable for: professionals, studio engineers, composers, producers
- system requirements:
- OSX 10.12/10.13
- Windows 7/8/10 (64-bit)
- CPU: 64-bit Intel or AMD (Intel i5 or faster recommended)
- 4 GB (8 GB or more recommended)
- free disk space: 30 GB
- screen resolution: 1440 x 900 (1920 x 1080 recommended)
- USB port for USB eLicenser
- internet connection for download, activation, account setup and registration
Reviews from other countries
Translate all reviews into English View original reviews
Hij is wat groot, daar moest ik even aan wennen, maar ben er heel blij mee! Hij past goed bij mijn stem en is prima in gebruik. Goede prijs/kwaliteitverhouding!
De helderheid van de stemmen zijn heel duidelijk, als je een beetje speelt met de equalizer hebt je ook een perfecte balans tussen de treble en bassen.
Ook kan je deze hoofdtelefoon langer aan houden dan mijn vorige zonder dat je er last van hebt.
Als ik een ander zou nodig hebben omdat deze verouder zou zijn, dan zou ik zeer zeker voor een dezelfde gaan,
Het is meer, ik denk erover na om ook de andere versie van 80 Ohm ook te kopen.
Echt heel tevreden mee!!!!
Steinberg UR22mkII Recording pack - All You Need
Thursday 13 October 2016 By Richard | Bax MusicSteinberg's UR22mkII recording pack is perfect who anyone wants to start recording and producing professional-quality music quickly and easily. This affordable pack contains everything you need to connect to a tablet or computer and get started right away.
Read more…SE Electronics Launches X1 S Microphone and Bundles
Friday 31 March 2017 By LizanneSE Electronics is proud to present the successor to their extremely popular X1 mic, the new X1 S condenser microphone, which has been upgraded significantly in just about every area. They're also introducing two new bundles, the Vocal Pack and the Studio Bundle.
Read more…M-Audio Presents M-Track Vocal Studio Pro
Tuesday 20 June 2017 By LizanneWho doesn't love a good package deal? The new M-Track Vocal Studio Pro by M-Audio is sure to be appreciated by anyone in the market for a good studio bundle!
Read more…CAD Audio: New Brand at Bax Music!
Wednesday 5 July 2017 By LizanneHere at Bax Music, we're always on the lookout for great brands and innovative products. That's why we're proud to announce that the newest addition to our ever-growing collection of brands, CAD Audio!
Read more…Antelope Audio Launches New Modelling Platform
Friday 6 October 2017 By LizanneThe developers over at Antelope Audio are modern-day pioneers when it comes to new software technology. The brand is known for high-end clocking generators and converters, and audio interfaces boasting the acclaimed FPGA platform, which brings us to their latest unveiling: the Discrete 4 and Discrete 8 audio interfaces, which now feature microphone modelling.
Read more…AI-1: Rode's First Audio Interface
Wednesday 6 December 2017 By Richard | Bax MusicAustralian brand Rode is well known for producing excellent studio-quality microphones at an affordable price. Now, they're introducing their first audio interface, the AI-1. Not only is it extremely easy to use, it's available as part of the NT1-AI-1-Kit which also includes the NT1 large-diaphragm condenser microphone, a shock mount with pop filter and a microphone and USB cable.
Read more…Bax Advised Recording Bundles for Singers and Songwriters
Thursday 14 December 2017 By Richard | Bax MusicThese days, many singers and songwriters are keen to set up their own home recording studio but aren't sure where to begin. That's not surprising, considering there are so many options out there. That's exactly why our product specialists here at Bax Music have done the hard work for you by putting together a selection of recording kits for you to choose from.
Read more…Bax Advised Electric Guitar Recording Kits
Wednesday 20 December 2017 By Richard | Bax MusicRecently, we revealed Bax Advised Recording Bundles for Singers and Songwriters and we told you that more kits were in the pipeline. Today, we're revealing no fewer than seven Electric Guitar Recording Kits that have been put together by our product specialists.
Read more…Take Advantage of Aston Microphones' Bundles
Tuesday 31 July 2018 By Richard | Bax MusicAston Microphones' professional studio mics like the Origin and the Spirit deserve to be combined with products like the Halo reflection filter and the Swiftshield shock mount with pop filter. For that reason, the Origin Bundle and the Spirit Bundle give you both of these products in addition to the mic of your choice for one great price.
Read more…Mackie Bundles for Creators, Studios, Producers, Performers
Monday 20 January 2020 By Kim | Bax MusicMackie offer up a fist-full of all-in-one Bundles tailored for musical creatives, home studios, producers and performers looking for a simple yet solid and professional starting point to expand their skills. They've offered up a total of four bundles: the Mackie Creator Bundle, Performer Bundle, Producer Bundle and Studio Bundle!
Read more…