This heavy-duty rack-mountable steel drawer with lock by Penn Elcom offers 4U of 19-inch rack space. Its ball bearings ensure smooth opening and closing and it has a slam latch too.
This heavy-duty rack mount drawer by Penn Elcom is equipped with a slam lock, a key lock and an integrated front pull handle. The ball bearings ensure that it opens and closes smoothly.
Equipped with two slam locks, the Penn Elcom R1291k/2L can be mounted as a sliding rack drawer or flipped upside down and installed as a shelf - a flexible addition to any 19-inch rack.
The Penn Elcom FP02Q-3U is a super-silent, dual-fan ventilation unit designed to be mounted in a 19" rack.
<p>This Penn Elcom sliding rack tray with adjustable depth is made of 1.2 mm steel and is fitted with several fixing points. It can easily be mounted in one of your 19 inch racks.</p>
This Penn Elcom 2U rack shelf is made of steel and finished with a black powder coating. Easy to mount into one of your 19 inch racks. Handy for your laptop or other loose gear.
Rack panel with handy cable access slot, equipped with brushes. With this rack panel, dust and dirt will not get a chance to get in at your valuable equipment. Can be mounted into a 19 inch rack.
Pre-drilled with multiple mounting points to accommodate an array of rack gear, this handy Penn Elcom rack shelf is made from solid steel, is 1U high and easily installed in any 19 inch rack.
What's the first thing you need to build a tight, powder-coated and ventilated rack rig? That's right: the Penn Elcom R2100/1U 19" rack box.
This Penn Elcom 1U rack shelf is made of steel and finished with black powder coating. Easy to fit into one of your 19” racks. Handy for a laptop or other loose equipment.
This black U-shaped rack panel is made of 1.2 mm steel and equipped with ventilation holes. Provide proper heat dissipation for your 19-inch amplifier rack with this Penn Elcom ventilation rack panel.
Compatible with any 19 inch rack, this ultra-strong Penn Elcom shelf is 1U high, 180mm deep, and comes finished with a rear lip to keep your gear and accessories in place.
This front panel has been made from 1.5mm-thick steel, comes with a DIN rail and is fully set up for installing 19 inch gear like lighting powerpacks, fully protecting it from dust and fluff while granting access to any fuses.
Steel rack panel punched with 12 holes. Mountable into one of your 19” racks. You can use this plate for your patch bay, for instance. The holes are suitable for Neutrik D-series connectors like XLR.
This Penn Elcom designed blind plate is 2U high, made of 1.2mm-thick steel and has been perforated to support efficient ventilation.
Penn Elcom 3U Rack Shelf is made of steel and finished with a black powder coating.
Neatly mount your amplifier in a rack with the help of this pair of 406mm supports. Compatible with Penn Elcom 6145 rack profiles, these supports are ultra strong and easily installed.
Easily keep your rack-mounted gear from overheating by installing this Penn Elcom designed ventilation panel. This panel is compatible with all standard 19 inch racks, is 4 units high and comes finished in a black-powder coating.
The Penn Elcom R1279/2UK 19" ventilation panel has been designed to let air through and cool your rack gear. This 2U panel comes coated in black.
Route your cables the clean way with this Penn Elcom-made cable guide. The R1311 horizontal cable support bar is easy to install in a 19-inch rack and helps to finish a professional-looking set-up.
Designed and built by Penn Elcom, this neat four-unit-high rack mount can be quickly and easily installed in any 19 inch rack, secured to a desk, or mounted onto a wall.
Designed and built by Penn Elcom, this neat 1U rack mount bracket can be quickly and easily installed in any 19 inch rack, secured to a desk, or mounted onto a wall.
This Penn Elcom-made 4U Rack Shelf has been forged out of steel and finished with a black powder coating. Mounted in a 19" rack, it's the perfect place for a laptop or other outboard gear.
Easily mounted onto any 19-inch rack, this Penn Elcom tie-bar neatens up that nest of cables for a clean and professional finish.
The Penn Elcom R1269/2U/24 is a 2U 19-inch front plate with 24 D-size openings for Neutrik D chassis parts. It's made of 1.2mm-thick steel and has a black powder coating.
Penn Elcom's R1291K is a retractable drawer or shelf depending on which way round you fit it. It's made of 1.2 mm-thick steel and easy to build into a 19-inch rack.
Easily installed in any 19 inch rack, this Penn Elcom tie-bar neatens up that nest of cables for a clean and professional finish.
Easily keep your rack-mounted gear from overheating by installing this Penn Elcom designed ventilation panel. This panel is compatible with all standard 19 inch racks, is 1 unit high and comes finished in a black-powder coating.
This Penn Elcom front plate is easily mounted on a 19" rack or patchbay, fitted with 16 punched holes and 4 mounting holes.
This U-shaped blind plate from Penn Elcom features ventilation holes and has been made of 1.2mm thick steel. This is the 3U version.
This rack panel is made from 1.2 mm steel and comes with four mounting holes. This 19 inch panel is 0.5U high.
Why seal your rack with a blind panel when you can mount the Penn Elcom CMP-1U 19-inch rack plate which features cable management rings?
This 3U hinged rack panel can be mounted in a 19-inch rack. The steel panel is vented, so heat won't build up inside your rack.
Strong and secure support courtesy of Penn Elcom. This steel rack shelf features a raised rear lip to keep gear in place, is two units high and has a 181.5mm installation depth.
The R1267/3UK is 3U high plain rack panel by Penn Elcom. The rack is made of 1.8 mm-thick aluminium with a black powder coating and flanged edges.
A sliding rack shelf like this one from Penn Elcom is useful in almost any 19-inch rack. It's made of steel, has a 2U height and can even be used as a keyboard tray.
Designed and built by Penn Elcom, this neat two-unit-high rack mount can be quickly and easily installed in any 19 inch rack, secured to a desk, or mounted onto a wall.
Designed and built by Penn Elcom, this neat three-unit-high rack mount can be quickly and easily installed in any 19 inch rack, secured to a desk, or mounted onto a wall.
The Penn Elcom R2520 rack mount wall bracket features a hinged strip for ever-easy access to your 19" rack gear and a lot less time spent fiddling to fit cables or new gear. This is the 2U version.
Use the R8840/14 shelf-support from Penn Elcom to reinforce and give an amplifier a stable position in your personalised R8800 anti-vibration rack mounting system.
Filters
Filters