Busy building a flight case? Be sure to finish it with ball corners such as the Penn Elcom C1341 to make it extra strong. This model has a 2.5mm internal radius and a 32mm offset.
The ideal finisher for DIY flight case lids, this Penn Elcom ball corner has a 1.5mm internal radius and comes pre-drilled with three mounting holes.
The best way to secure your Penn Elcom H1010 strap handle to your flight case is this bolt plus T-nut set. Grab it, install it and off you go!
Specially designed for the Penn Elcom EG-0522/2 profile, this male corner bracket is made from solid steel and comes pre-drilled with four mounting holes.
<p>Are you building a flight case for your valuable equipment? This aluminium edge extrusion will make the edge and the lid fit perfectly. It is suited for plates with a thickness of 10.2 mm.</p>
This build-in wheel assures you of easy transport from A to B. It has a diameter of 50mm and as it is mounted on the underside of a flightcase, the height is kept to a minimum.
This set contains a speed nut, bolt and rings for an aluminium rack system. Installing your gear is easy and safe, as the washer protects the layer of varnish and ensures that it will not be damaged.
This set contains a speed nut, bolt and rings for an aluminium rack system. This set is fit for the 6135 and 6145.
Dit schuim heeft een dikte van 5 mm en heeft een zwarte kleur.
Dit schuim heeft een dikte van 10 mm en heeft een zwarte kleur. Omdat dit schuim hard is zal bijvoorbeeld uw table top niet verschuiven in de flightcase en blijft deze beschermd.
Omdat dit schuim hard is zal bijvoorbeeld uw table top niet verschuiven in uw flightcase en blijft deze beschermd. Dit schuim heeft een dikte van 50 mm en heeft een zwarte kleur.
Met dit klittenband bevestigt u makkelijk en snel uw speaker schuim op de behuizing van uw luidspreker. Het klittenband is 25 mm breed en is zelfklevend.
<p>This dish is made of 1.2 mm thick steel and has six pre-drilled holes. The dimensions of the punched part are 146 x 96 millimetres. The dimensions of its exterior are 127 x 187 millimetres.</p>
This rack panel is made from 1.2 mm steel and comes with four mounting holes. This 19 inch panel is of the 1 U type.
This rack panel is made from 1.2 mm steel and comes with four mounting holes. This 19 inch panel is of the 2 U type.
This rack panel is made of 1.2 mm steel and equipped with four mounting holes. This 19 inch plate is 3U high.
This handy tool is ideal for decorative purposes but also comes in handy when you're using a screen as a backstage monitor.
Ontwerp tot in detail flightcases naar eigen inzicht met de uitgebreide en gebruiksvriendelijke Penn Elcom CaseDesigner flightcase ontwerpsoftware.
Filters
Filters