Duratruss Light Stands & Trusses

Duratruss DT23 corner C23 135

This lightweight DT23 decorative truss, ideal for showrooms, pubs and restaurants, has all the charm of an actual truss. Its main tubes are just the right thickness, and easily distinguishable from the braces.

Duratruss DT23 C25-L90 2-way corner 90° apex in

This lightweight DT23 decorative truss, ideal for showrooms, pubs and restaurants, has all the charm of an actual truss. Its main tubes are just the right thickness, and easily distinguishable from the braces.

Duratruss DT23 4-way angle T43

This lightweight decorative truss, ideal for showrooms, pubs and restaurants, has all the charm of an actual truss. Its main tubes are just the right thickness, and easily distinguishable from the braces.

Duratruss DT 33 2.5 metres

Duratruss DT33 C21-L90 90-degree corner 0.5 m

The Duratruss DT 33 has main tubes with a diameter of 50 mm and bracing with a 20mm diameter - each tube has a wall thickness of 2 millimetres. This part consists of two tubes of 50 cm that have a 90-degree angle.

Duratruss DT 34 T35-T T-section

The Duratruss DT 34 has main tubes with a diameter of 50 mm and bracing with a 20mm diameter - each tube has a wall thickness of 2 millimetres. This T-section has a length of 0.5 metres.

Duratruss DT33 C33-LD 90-degree corner + down

The Duratruss DT 33 has main tubes with a diameter of 50 mm and bracing with a 20mm diameter. Each tube has a wall thickness of 2 millimetres. This DT 33 truss has two 0.5m parts in an angle of 90 degrees plus a straight part that goes down.

Duratruss DT33 C34-LD 90-degree corner + down

The Duratruss DT 33 has main tubes with a diameter of 50 mm and bracing with a 20mm diameter - each tube has a wall thickness of 2 millimetres. This DT 33 truss has two 0.5m parts in an angle of 90 degrees plus a straight part that goes down.

Duratruss DT 33 C19-L45 45-degree corner 1m

The Duratruss DT 33 has main tubes with a diameter of 50 mm and bracing with a 20mm diameter - each tube has a wall thickness of 2 millimetres. This part consists of two 1-metre pieces in a 45-degree angle.

Duratruss DT 33 C22-L120 120-degree corner 50cm

The Duratruss DT 33 has main tubes with a diameter of 50 mm and bracing with a 20mm diameter - each tube has a wall thickness of 2 millimetres. This part consists of two 50cm tubes that have a 120-degree angle.

Duratruss DT 33 C25-D90 90 degrees down

The Duratruss DT 33 has main tubes with a diameter of 50 mm and bracing with a 20 mm diameter - each tube has a wall thickness of 2 mm. The C25-D90 consists of two 50 cm pieces that have a 90-degree angle.

Duratruss DT 33 C31-LU 90 degrees + up

The Duratruss DT 33 has main tubes with a diameter of 50 mm and bracing with a 20mm diameter - each tube has a wall thickness of 2 millimetres. The C31-LU consists of two 50cm tubes in a 90-degree angle and a 50cm tube that goes upwards.

Duratruss DT 33 C44-LUD 90 degrees + up + down

The Duratruss DT 33 has main tubes with a diameter of 50 mm and bracing with a 20mm diameter - each tube has a wall thickness of 2 millimetres. This DT 33 truss has two 0.5m parts in an angle of 90 degrees plus a straight part that goes up and a straight part that goes down.

Duratruss DT 33 C45-LUD 90 degrees + up + down

The Duratruss DT 33 has main tubes with a diameter of 50 mm and bracing with a 20mm diameter - each tube has a wall thickness of 2 millimetres. This C45-LUD has two 0.5m parts in an angle of 90 degrees, plus a straight part that goes up and a straight part that goes down.

Duratruss DT 33 C61-XUD X-section + up + down

The Duratruss DT 33 has main tubes with a diameter of 50 mm and bracing with a 20mm diameter - each tube has a wall thickness of 2 millimetres. This DT33 C61-XUD X-section allows for the placement of vertical, upright trusses.

Duratruss DT 33 T42-TD T-section + down

The Duratruss DT 33 has main tubes with a diameter of 50 mm and bracing with a 20mm diameter - each tube has a wall thickness of 2 millimetres. This T42-TD T-section has a length of 0.5 metres, that allows for the placement of a vertical truss.

Duratruss DT 34 C19-L45 45-degree corner 1 m

The Duratruss DT 34 has main tubes with a diameter of 50 mm and bracing with a 20mm diameter - each tube has a wall thickness of 2 millimetres. This part consists of two 1-metre pieces in a 45-degree angle.

Duratruss DT 34 C20-L60 60-degree corner 1 m

The Duratruss DT 34 has main tubes with a diameter of 50 mm and bracing with a 20mm diameter - each tube has a wall thickness of 2 millimetres. This part consists of two 1-metre pieces in a 60-degree angle.

Duratruss DT 34 C23-L135 135-degree corner 50 cm

The Duratruss DT 34 has main tubes with a diameter of 50 mm and bracing with a 20mm diameter - each tube has a wall thickness of 2 millimetres. This part consists of two tubes of 50 cm that have a 135-degree angle.

Duratruss DT 34 C51-XD X-section + down

The Duratruss DT 34 has main tubes with a diameter of 50 mm and bracing with a 20mm diameter - each tube has a wall thickness of 2 millimetres. This DT34 C51-XD X-section allows for the placement of a vertical, upright truss.

Duratruss DT 31 L135 135-degree corner 50 cm

The Duratruss DT 31 has main tubes with a diameter of 50 mm and a wall thickness of 2 millimetres. The L135 consists of two 50-centimetre pieces in a 135-degree angle.

Duratruss DT 31 L60 60-degree corner 50 cm

The Duratruss DT 31 has main tubes with a diameter of 50 mm and a wall thickness of 2 millimetres. The L60 consists of two 1-metre pieces in a 60-degree angle.

Duratruss DT 32 BPF baseplate female

One of the most popular truss systems is the DT32 series, thanks to its high weight capacity and lightweight construction. This DT32 BPF baseplate features female half-connectors for 50mm tubes.

Duratruss DT 32 BPM baseplate male

One of the most popular truss systems is the DT32 series, thanks to its high weight capacity and lightweight construction. This DT32 BPM baseplate features male half-connectors for 50mm tubes.