▾

Beyma WL3 40W, 0.8-inch Neodymium Waveguide Compression Driver (Set of 2)

no reviews yet

Discontinued, this product can no longer be ordered.

No alternatives found

Product information
Reviews (0)
Downloads (1)

Beyma WL3 40W, 0.8-inch Neodymium Waveguide Compression Driver (Set of 2)
Product no: 9000-0102-8542 Bax Music Warranty: This product comes with a 3-year warranty.

General

The 0.8 inch Beyma WL3 high-frequency compression driver comes partnered up with a 3 inch waveguide to switch the focus to reducing interference and minimising acoustic loss. Ideal for finishing off array systems, this driver comes fitted with a neodymium magnet and a lightweight 1.75 inch voice coil. The level of quality is carried through to a polyester diaphragm that supports a 700Hz to 20,000Hz frequency range, while the sensitivity sits at 105 decibels. Once installed, the WL3 promises an AES power rating of 40 Watts at 8 Ohms.

Specifications

Product features

Tweeter diameter	0.8 inches
Sustainable product	not specified
Sensitivity	105 dB
Includes horn	yes
Maximum frequency	20 - 20.9 kHz
Minimum frequency	500 - 999 Hz
Nominal impedance	8 ohms
RMS capacity in watts	0 - 49 W
Throat exit	not applicable
Type of magnet	neodymium

Weight and dimensions including packaging

Weight (incl. packaging)	2,1 kg
Dimensions (incl. packaging)	24,8 x 21,0 x 9,0 cm

Product specifications

technical specifications:
- throat diamter: 20.5mm/0.8"
- flange height: 76.2mm/3"
- nominal impedance: 8 Ohms
- impedance: 5.5 Ohms at 4.5 khz
- Re: 4.5 Ohms
- power: 40W AES over 1.5Hz
- program power: 80W over 1.5kHz
- sensitivity: 105dB 1W at 1m coupled to horn
- frequency range: 700 Hz - 20,000 Hz
- recommended crossover frequency: 1.5kHz or higher (12dB/oct min. slope)
- speaker coil diameter: 44.3mm, 1.75"
- flux density: 1.8 T
- BL factor: 8 N/A
- diaphragm material: polyester
construction:
- diameter: 80mm
- depth: 142mm
- mounting: x4 6mm screw holes
- net weight: 1 kg
- magnet: neodymium