Soundcraft 6000

Product specifications

• 67 channel total:
• 43 full input channels + 24 tape return channels (usable as effect returns)
• Layout starting from left to right:
• 24 x full input channel strips
• 1 x Tape monitor control strip
• 1 x Master control channel (2 units wide)
• 24 x Tape return
• 19 x full input channel strips
• Custom Monitior selection channel included
• Outboard professional patchbay + patch cables included
• Remote control Monitor switch in Patchbay included
• Wiring from patchbay to desk included.
• Patchbay rack included
• Mixer top rack included
• Console stand included
• Manual + schematics included

Performance specs

• Freq. response +0.0 - -0.5 dB 20Hz-20KHz

THD

• Groups Less than 0.004% @ 1 KHz measured at 20dB above nominal level
• Groups Less than 0.01% @ 10 KHz measured at 20dB above nominal level
• Outputs Less than 0.008% @ 1 KHz measured at 20dB above nominal level
• Outputs Less than 0.02% @ 10 KHz measured at 20dB above nominal level

NOISE

• Mic Input noise Less than -128 dBu (150 Ohm source, 20KHz bandwith, unweighted)
• Group noise (16 ch routed) -82 dBu
• Mix noise 16 ch routed) -87 dBu
• Aux noise (32 ch console) - 84 dBu

CROSSTALK

• Mic to Line Better than -90dB (1KHz)
• Line to Mic Better than -110dB (1KHz)
• Adjacent Channel Better than -110dB (1KHz)
• Channel Muting Better than -110dB (1KHz)
• Routing Better than -110dB (1KHz)

INPUT IMPEDANCES

• Mic inputs 2Kohm balanced
• Line inputs 20 Kohm balanced
• Insert returns 10 Kohm unbalanced

OUTPUT IMPEDANCES

• Less than 75 ohms

OUTPUT CAPABILITY

• Balanced Outputs Not less than +26 dBu into 600 ohms
• CRM GC Outputs Not less than +26 dBu into 600 ohms
• Other Outputs Not less than +26 dBu into 2 Kohm

HEADROOM

• Not less than 22 dB at any point in console
• Not less than 22 dB at mix summing amps
• Not less than 30 dB at aux summing amps