The Sennheiser ADP UHF is a passive directional antenna that's able to pick up frequency between 470 MHz and 1075 MHz.
Sennheiser's AC-41 antenna combiner lets you connect up to four ew-Series in-ear transmitters to a single antenna and thanks to its active electronics, you can provide each of your SR IEM G4 transmitters with power using the included BNC cable.
Plan on using multiple Sennheiser Evolution Wireless Digital systems at the same time? Grab the EW-D ASA antenna splitter and connect up to four EW-D EM receivers to two antennas and supply them with power.
The A 1031 UHF is a passive omnidirectional antenna by Sennheiser. This antenna is fit for frequencies between 450 and 960 MHz.
The Sennheiser 576131 antenna is compatible with the EW G3 and XS wireless receivers that operate on the 470 - 865 MHz frequency band. It's a replacement part should the original antenna become lost or damaged.
<p>If your wireless Sennheiser system is suffering from interference in a more difficult environment, you can amplify the signal with 4 dB with this Sennheiser AD 1800 passive directional antenna to increase the range.</p>
The Sennheiser GZL RG 58 BNC cable can be used to connect antennas and antenna splitters. This flexible, 1-metre-long cable is fully compatible with Sennheiser's Evolution Wireless Series.
Made for the EM-XSW 2 wireless receiver, the Sennheiser GA 2-XSW 2 antenna mounting kit sets you up with more antenna cable-length for optimum reach.
Preparing for a big gig? The Sennheiser GZL RG 58 antenna cable lets you connect separate antennas placed up to ten metres away from the receiver.
This pair of Sennheiser Half Wave Dipole Antennas have a BNC connector and can be connected to EW-D EM Series receivers.
The Sennheiser EW-D ASA antenna splitter is an absolute essential when working with multiple Evolution Wireless Digital systems. Hook up four EW-D EM receivers to the two antennas and supply them with power.
These two half-wave dipole antennas from Sennheiser are compatible with the EW-D EM and EW-DX EM2 receivers. The antennas have a BNC plug and operate on the 470 - 550 MHz frequency band.
<p>The Sennheiser ASP 212 is a passive antenna splitter to which you can connect two antennas. Every incoming signal is subsequently split into two signals.</p>
This spare Sennheiser antenna is compatible with Sennheiser SK body packs.
<p>Send the incoming signals of one antenna booster to three EW receivers with this practical passive splitter by Sennheiser, the ASP 113.</p>
<p>The Sennheiser ASP 114 is a passive antenna splitter which allows you to split the signal into four. In order to compensate for 8 dB of signal loss, you need to use the ASP 114 in combination with an antenna booster by Sennheiser.</p>
Filters
Filters