A mic stand and a microphone are useless without a decent microphone clip. Use Shure's A25D, for instance, to securely mount one on the other, and you'll have your hands free during your gigs.
The rechargeable Shure SB900B lithium-ion battery is compatible with an array of Shure gear, including the Axient Digital, ULX-D, QLX-D, UR5, P3RA, P9R, and P10R systems.
Did you break the grille of your Shure SM58 microphone? No need to panic, you can simply replace it with the RK143G microphone grille!
If your wireless handheld microphone's cartridge is broken, you don't have to replace the whole thing. Why not just get a new microphone head, like this Shure RPW118 Beta 58A microphone head?
The Shure SB903 rechargeable lithium-ion battery is fully compatible with all Shure SLX-D Series transmitters.
The upgraded version of the PS21E, the Shure PS24E power supply is compatible with the SLX4E, SLX4LE, PG-Series, PGX-Series T3, T4V, T4G, T4N, T88 and LX88 wireless receivers.
Are you tired of noise ruining your recordings or broadcasts? The RK345 takes care of wind and breath noise, leaving you with a clear recording.
The Shure UA860SWB is a 1/2 wave antenna that improves the reception of the Shure SLX, ULX, LIC, UHF and UHF-R, allowing for a better reception.
A dented or damaged grille can really affect your mic's performance, so replacing it is the best thing you can do. Keep your BETA58A microphone well-protected with the Shure RK323G replacement grille!
The Shure UA221 is a passive antenna splitter/combiner kit. Use it to split an incoming signal into two outgoing signals, or to combine two incoming signals into a single signal.
The Shure A58WS microphone windscreen eliminates wind and breath noise without affecting overall sound quality. It's suited for ball-type mics, such as the Shure SM58, Beta 58A, etcetera.
The Shure PS43E is here to replace the PS31E, PS40E and PS41E mains power adapters, and is compatible with receivers from the LX, UC, SC, ULX, SLX and PSM Series.
Are your various PSM wireless systems causing interference for one another? No problem! With this directional antenna, you problem is solved!
The Shure SBC80-903-E battery charger has enough slots to recharge eight Shure SB903 rechargeable batteries at a time, making it an indispensable accessory for extensive Shure SLX-D-based setups.
With the efficient Shure SBC203-PS charging hub, two SLX-D batteries can be recharged at the same time, whether it's an SD903 battery or an SLXD Series handheld transmitter.
The Shure A85F line matching transformer allows you to connect a balanced low-impedance microphone to an unbalanced high-impedance input.
Shure's wireless handheld transmitters have a slightly larger diameter than regular microphones, which is why Shure designed the WA371 microphone clip. It securely mounts your handheld microphone on any standard mic stand.
The Shure SB904 lithium-ion battery pack delivers up to 12 hours of run-time on a full charge.
Shure's bodypack transmitters allow you to transmit your guitar or keyboard's signal to a receiver, provided you have an additional cable. Fortunately, Shure offers just the thing you need with the WA304 instrument cable!
Add it to any existing Shure wireless system, and the Shure Nexadyne RPW204 capsule will give your live rig an enormous upgrade. Expect unbelievable clarity that reaches every corner of the venue thanks to Revonic Dual Engine tech.
In order to get the best possible results, it's important to mount your drum microphone at the exact right position. With the A56D drum microphone mount, Shure makes it easy for you!
The Shure A2WS microphone windshield keeps unwanted noise caused by breath or wind at bay. It also features a locking system that will keep it firmly in place!
Have you ever made a perfect recording that was ruined by annoying plosives and other breath noise? You could have prevented that with the Shure PS-6 popper stopper pop filter!
Having a transmitter on your belt can be a bit uncomfortable, especially when you tend to move around a lot on stage. The Shure WA570A solves that problem, as it is a pouch that you can strap around your waist.
The Shure HA-8089 helical antenna is an advanced type of directional antenna. Instead of the usual 100-degree beamwidth of a directional antenna, this helical antenna boasts a beamwidth of only 50 degrees.
The Shure SBC200-E is a charging station (with power supply) for two SB900 battery packs, belt packs or transmitters. It is compatible with body packs and transmitters from the P9RA, P10R, ULXD1 and ULXD2 series (among others).
This sturdy belt has a cloth pouch for carrying your UR1 or UR1H bodypack transmitter. Available in both black and white, so pick your own style!
The Shure RK265G is the easiest way of replacing your Beta58A's damaged grill, keeping your mic safe, and keeping its great sound intact!
You can use the Shure A15AS attenuator to protect your mixer, PC or amplifier from input overload. It reduces your microphones output level by 15, 20 or 25 dB to prevent it from overloading any inputs or channels.
To keep your recordings free of breath and wind noise, equip your mic with the Shure RK183WS windscreen! It's suitable for Beta 98, MX183, MX184, MX185, MX202, WH30, WL183, WL184 and WL185 microphones.
This gold-coloured housing will give your Shure BLX2-SM58 or BLX2-Beta58A wireless handheld microphone a complete make-over. Great for colour-coding mics!
The Shure SBC800-E 8-Up charges up to eight Shure SB900 batteries simultaneously. These rechargeable batteries are used for the P10R and P9RA in-ear monitor systems.
The Shure PA411 antenna combiner powers and distributes the RF signal of up to four PSM300 transmitters.
Compatible with Shure TwinPlex TL40 lavalier microphones, the Shure RPM40STC tie clip provides a neat and efficient solution when it comes to discretely miking up the presenter and guests. This pack includes three clips.
Even a small unwanted bit of noise can ruin a recording, and shocks and vibrations are often the main culprit. Luckily, the Shure A55M shock mount prevents those vibrations from reaching the mic and polluting the signal!
With the rack-mountable GLXD+FM Dual Band Frequency Manager, a maximum of six GLXD4R+ receivers be linked, so that even more demanding multi-channel setups can be guaranteed solid and reliable RF performance.
Looking to improve your wireless signal strength? The Shure PA805DB-RSMA Dual Band Passive Directional Antenna boosts the reception of GLXD4R+ half-rack receivers and GLXD+ FMDB Dual Band Frequency Managers by up to 8dB.
These 5 colour-coded ID caps allow you to quickly distinguish between various BLX2 handheld transmitters. Suited for the PG, SM and Beta wireless systems.
The universal Shure A25E microphone clip is fully compatible with any microphone with a 25 to 30mm shaft diameter, making it the ideal for models like the Shure KSM9, KSM9HS and KSM8.
This single-slot charging station can be used to recharge a Shure SB904 rechargeable battery.
The Shure RK187T1-B clip has been designed to fit all Shure WL18XM Series lavalier microphones, comes in black and ties down a single clip-on mic.
Everything breaks eventually, so Shure anticipated that by offering this replacement preamp for their Beta 53/91/98 and MC50/51 microphones. It's also smart to keep one as a back-up, just in case!
The Shure RPM560 is a replacement headband for the WBH53T/WBH54T headset microphones. This is the Tan version.
Just in case they get worn out or go missing, the Shure RK379 microphone clip and windshield pack is compatible with the Shure SM31FH Fitness microphone headset.
A Shure Beta 87 microphone is quite valuable, so it should be well protected. If its grille is damaged, replace it with this RK312 microphone grille!
Filters
Filters